Narda Safety Test Solutions S.r.l. Leader on Electromagnetic Compatibility and EMC EMI Receiver  
   English  Italiano
PMM a Brand of Narda Safety Test Solutions S.r.l. Electromagnetic Compatibility EMC EMI Instruments
 
 
  Radiated Immunity

PMM  Rad-IS - RF Radiated Immunity SystemPMM
  Unlikely the EMC Conducted Immunity System (refer to “PMM Cond-IS” documentation) for residential and industrial EUTs (Equipments Under Test) testing, “RF Radiated Immunity” compliance verification as for Standard IEC/EN 61000-4-3 requires a proper shielded and absorber lined testing enclosure where to inject required EM field-strength levels.
Depending on selected testing environment, which could be for example a Semi-Anechoic Chamber (SAC) or a GTEM Cell, some components to be used in the testing chain may significantly change, like Amplifiers or Antennas, while some others can remain the same at least up to 3 GHz, like Generator, Power Meter, Field Probe and Software for automatic management of both Calibration and Testing phases.
A so called “Radiated Immunity System” can still be defined for almost 80% of required components and that’s exactly why NARDA STS Italy has created “PMM Rad-IS” to fulfil core requirements of such kind of testing, leaving an open choice only for Amplifiers and Antennas/GTEMs to be driven as “slave units” while selected case by case according to the various EM field-strength levels.

Product description PDF formatEnglish


PMM  1008 Magnetic immunity test systemTop of page PMM

PMM 1008

PMM 1008 and Loop

The PMM 1008 is an integrated system for magnetic field immunity test according to IEC 1000-4-8 & EN 61000-4-8.
The system is composed by PMM 1008/1 (programmable current generator) and a loop antenna that is available in different sizes to select according to the EUT dimensions:

- 1008/2: square loop antenna, 1x1 m
- 1008/3: square loop antenna, 1,5x1,5 m
- 1008/4: square loop antenna, 2x2 m
- 1008/5: rectangular loop antenna, 2,6x1 m

One or two masts – according to the size – allow for positioning up and down and rotate the loop antenna.
The generator features output current sensing to control the stability of the magnetic field produced by the loop antenna respect to variations due to cable heating, connections and power line fluctuations.
An audible alarm is generated during the test to warn the user.

Product description PDF formatEnglish


PMM  3030 - EMC Wide Band RF Generator, 9 kHz - 3 GHzTop of pagePMM
PMM  3010 - EMC Wide Band RF Generator, 9 kHz - 1 GHzTop of pagePMM
PMM 3030  
PMM 3030 is a powerful wide band signal generator, ideal for all EMC immunity test applications that has been designed adopting an innovative philosophy and state-of-art components. The model equipped with plug-in, rechargeable battery pack allows for ground loops-free operation and true portability. PMM 3030 features a particularly user-friendly interface based on a clear, bright display and function keys conveniently arranged. All settings can be done by the front panel keyboard and rotary knob.
 
MAIN FEATURES
  • PMM 3030 9 kHz to 3 GHz frequency range
  • PMM 3010 9 kHz to 1 GHz frequency range
  • -107 to +10 dBm RF output
  • Internal AM and pulse modulation
  • Battery operation (mod. 3030-02)
  • RS232/USB communication
  • GPIB with external adapter

Product description PDF formatEnglish

 
SPECIFICATIONS
PMM 3030
Frequency range
9 kHz – 3 GHz
Frequency resolution
1 kHz
Frequency accuracy
± 10 ppm
Level range
-107 to +10 dBm
Level resolution
0.1 dB
Level accuracy
± 1 dB, level > -30 dBm
Output impedance
50 ohm
RF output connector
N female
Spectral purity -harmonic
< -30 dBc @ 0 dBm, f > 1 MHz
AM modulation, internal
2 – 50 – 400 Hz, 1 kHz; 10% to 90%
AM modulation, external
2 Hz to 10 kHz; 10% to 90%
Input impedance
600 ohm
Input connector
BNC female
Internal pulse modulation
1 Hz: ON/OFF ratio @ 0 dBm > 40 dB 200 Hz: ON/OFF ratio @ 0 dBm > 40 dB
Remote control
RS-232, USB 2.0 (rear), User Port GPIB (external adapter)
User Port
RF OFF, RF ON, Start/stop test
Display
340 x 240 pixels, 16 gray levels
Display units
dBm, dBuV
Operating temperature
+10°C ÷ +40°C
Power supply
DC 10 – 15 V, 2.5 A
AC – DC adapter 115 – 230 V 50/60 Hz
Plug-in Battery pack (model 3030-02)
Li-Ion, rechargeable 3 h operation time (avg)
Dimensions
235 x 105 x 335 mm (WxHxD)
Weight
3.5 kg (mod. 3030-01) 4.3 kg (mod. 3030-02)

PMM  6600Top of page  - RF Power Sensor, 10 kHz - 1 GHzPMM
PMM 6600 PMM 6600 is a simple and easy-to-use RF power meter useful for calibrating CDNs and CLAMPs of conducted immunity systems or for measuring the power forwarded to antennas or cells. Using a bidirectional coupler and two PMM 6600 allows to measure both reflected and forwarded power. 

Product description PDF formatEnglish


PMM  6630 - USB RF Power Sensor, 9 kHz - 3 GHzTop of page PMM
PMM 6630  
Accurate in laboratory, fast in manufacturing and solidly build for field applications

PMM 6630 is the ideal solution for RF power measurements in a wide variety of applications, including EMC immunity test systems to calibrate CDN and Clamps as well as to measure the input power of antennas or GTEM cells

Together with a directional coupler both direct and reflect power can be measured easily and precisely.

PMM 6630 is supplied with easy to use PC software to display the measurements in dBm, W, Vrms.

 
MAIN FEATURES
  • 9 kHz to 3 GHz frequency range
  • 100 nW to 1 W (-40 to +30 dBm) input  range
  • Excellent power linearity (0.2 dBm typical)
  • True RMS response across 70 dB dynamic range enables accurate CW and modulated power measurements
  • Low current consumption to save laptop battery
  • No need for a Reference Calibrator
  • Lightweight, convenient and easy to use with desktop and laptop PC
Product description PDF formatEnglish
SPECIFICATIONS
6630
Frequency range
9 kHz to 3 GHz
Power measurement range
100 nW to 1 W
-40 to +30 dBm
Max. input power
2 W peak envelope max. 300 ms
Power linearity
0.2 dB (-40 to +30 dBm @ 50 MHz; 25 °C ± 10°C)
Measurement accuracy 1, 2
< 0.35 dB
Measurement path
High: +30 to -9 dBm
Low: -9 to -40 dBm
1 dB typ. switching point hysteresis
Max. SWR
10 ÷ 300 kHz:                  1.10        +30 ÷ -9 dBm
>300 ÷ 100 MHz              1.05
>100 MHz ÷ 1 GHz          1.10
>1 ÷ 3 GHz                      1.25
10 kHz ÷ 3 GHz              1.20        -9  ÷ -40 dBm
Operating temperature 
-10°C ÷ +50°C
Power supply
5 VDC – 100 mA from USB port
RF connector
N male, 50 Ω
PC communication interface
USB 1.0 – 1.1 – 2.0
PC Software settings
N° of Averages (1 to 1024)
Offset
Correction Factor
Measuring units
dBm, W, Vrms
Dimensions
30 x 30 x 95 mm (WxHxP)
Weight 
0.12 kg
 
1.     Max. SWR of source: 1.25
2.     Calculated with worst calibration uncertainities to the calibration factor of 0.17 dB

PMM  EP-600, EP-601, EP-602, EP-603, EP-604 Broadband active electric field probesPMM
  EP600
PMM EP-600: 100 kHz - 9,25 GHz; 0,14 - 140 V/m

PMM EP-601: 10 kHz - 9,25 GHz; 0,5 - 500 V/m
 
PMM EP-602: 5 kHz - 9,25 GHz; 1,5 - 1500 V/m
 
PMM EP-603: 300 kHz - 18 GHz; 0,17 - 170 V/m
 
PMM EP-604: 300 kHz - 26,5 GHz; 0,4 - 800 V/m

Electric field probes (diode detectors) combining excellent RF characteristics from 5 kHz up to 18 GHz, wide range, small size, light weight (25 g only), true spherical symmetrical configuration.

Suitable for all EMC/EMI applications (chambers and TEM/GTEM cells), biology, materials research and wherever fast and accurate measurements with negligible or minimum interference of the probe to the field under measure are essential.

The model EP-602 is designed for the most severe RF immunity tests e.g. in Aerospace and Automotive applications, where it can withstand overloads up to the exceptional value of 3000 V/m.
The model EP-603 is at present the only probe based on a central spherical body with three axial, symmetrical dipoles in the frequency range up to 18 GHz: the perfect spherical symmetry guarantees superior isotropic characteristics respect to the conventional probes with resistive strip-line or monopoles.

The advanced internal Li-Mn rechargeable battery guarantees superior reliability with up to 80 hours of continuous operation.

The battery is commonly available, accessible and easily replaceable without needing recalibration.

This PMM’s exclusive technology overcomes the inconvenients other types of probes may suffer and allows for reducing the probe costs.

PC direct connection via Optical to RS232/USB adapters, fiber optic cables available up to 40 m.

The probes are supplied with PC software for setting the various operating modes and parameters, and for reading and logging the measurements. 

Accredited calibration available from our LAT Center Nr. 08.

Product description PDF formatEnglish

Brochure EP-603 PDF formatEnglish


PMM  OR-03 - Optical Repeater and Electric and Magnetic Field Probes up to 40 GHzTop of page PMM
Probe

The PMM OR-03 is a programmable optical repeater that allows the connection of every 8053A probe (electric and magnetic fields) to the user's Personal Computer via an optical fiber cable.
The OR-03 is an easy programmable device mainly designed for EMC applications together with the SW-03 or WIN-OR-03 software or with a software developed directly by the user.

Product description PDF format : Italiano   English   Chinese

 

Probe Field F. range Level Sensitivity
EP330 Electric 100 kHz - 3 GHz 300 V/m 0.3 V/m
EP301 Electric 100 kHz - 3 GHz 1000 V/m 1 V/m
EP183 Electric 1 MHz - 18 GHz 800 V/m 0.8 V/m
EP408 Electric 1 MHz - 40 GHz 800 V/m 0.8 V/m
HP032 Magnetic 100 kHz - 30 MHz 20 A/m 0.01 A/m
HP102 Magnetic 30 MHz - 1 GHz 20 A/m 0.01 A/m

 


 PMM LP-02Top of page PMM
   

LP-02 Log Periodic Antenna 0,2 - 3 GHz

MAIN FEATURES
• 200 MHz to 3 GHz frequency range
• Excellent Antenna factor
• Tripod adapter for easy vertical - horizontal polarization change
• Individual calibration
• Robust, rustproof aluminium construction
• Lightweight
PMM LP-02 is a log-periodic antenna designed for application in radiated EMC.
It can be used in conjunction with any Receiver or Spectrum Analyzer.
Its ideal companion is the EMI Receiver Unit PMM 9030 that can be easily
mounted on the antenna mast (*).
PMM LP-02 is also available in a convenient Antenna Sets
AS-02 (30 MHz - 3 GHz) including the Antenna models BC-01 & LP-02.
AS-03 (30 MHz - 6 GHz) including the Antenna models BC-01,LP-02 & LP-03.

Product description PDF formatEnglish

 PMM LP-03Top of page PMM
   

LP-03 Log Periodic Antenna 0,8 - 6 GHz

MAIN FEATURES
• 0,8 to 6 GHz frequency range
• Excellent flatness
• Tripod mounting
• Individual calibration
• Robust, rustproof aluminium construction
• Lightweight
PMM LP-03 is a log-periodic antenna designed for application in radiated EMC.
It can be used in conjunction with any Receiver or Spectrum Analyzer.
Its ideal companion is the EMI Receiver Unit PMM 9060 that can be easily
mounted on the antenna mast (*).
PMM LP-03 is also available in a convenient Antenna Kit AS-03 inclusive of the
antennas mod. BC-01 & LP-02 to cover the 30 MHz — 6 GHz frequency range.
(*)The direct connection between antenna and Receiver Unit PMM 9060 eliminates
additional sources of uncertainties due to coaxial cable attenuation and scattering.

Product description PDF formatEnglish


 PMM BC-01Top of page PMM
   

BC-01 Biconical Antenna 30 - 200 MHz

MAIN FEATURES
• 30 to 200 MHz frequency range
• Excellent Antenna Factor
• Tripod adapter for easy vertical - horizontal polarization change
• Individual calibration
• Robust, rustproof aluminium construction
• Lightweight
PMM BC-01 is a biconical antenna designed for application in radiated EMC.
It can be used in conjunction with any Receiver or Spectrum Analyzer.
Its ideal companion is the EMI Receiver Unit PMM 9030 that can be easily
mounted on the antenna mast (*).
Also available in portable,convenient Antenna Sets
AS-02 (30 MHz - 3 GHz) including the Antenna models BC-01 & LP-02.
AS-03 (30 MHz - 6 GHz) including the Antenna models BC-01, LP-02 & LP-03.

Product description PDF formatEnglish

 PMM AntennasTop of pagePMM
 Antennas  

Antennas

The range of PMM antennas covers most of the EMI/EMC applications. Each antenna is individually calibrated. Up to 50 MHz the monopole antennas are calibrated with the substitution method.
Loop antennas are calibrated inside an anechoic chamber by measuring the current in a primary loop and calculating the induction field; the loop antenna is placed in the known field and the antenna factor is then measured.

Comprehensive antenna kits are available as cost-effective solutions, too.  


PMM  PMM Immunity Suite SoftwareTop of page PMM
 

PIMS - PMM Immunity Suite Software

The new "PMM Immunity Suite" (PIMS) software, accurately designed in terms of functions and user friendly approach, can manage the whole range of PMM components during both Test and Calibration processes, introducing the possibility of looking at the various monitoring tracks from generator, power meters and field sensors. The software is user friendly and provides a really ergonomic configuration which comfortably drives the operator through the various steps, from definition and selection of HW components to settings of required parameters and finally starting the test with "just one button". Program window has been designed for omni-comprehensive overview of each specific test being performed, so that operator can easily control all details with a quick glance. A graphical scheme of the test set-up clearly reminds about proper physical connections between components, which could slightly differ between Tests and Devices' Calibrations.
In case of Radiated Immunity Tests according to IEC/EN 61000-4-3 in Anechoic Chambers or TEM/GTEM Cells, PIMS does also include calibration of radiated field up to 16 points in the grid of Field Uniformity assurance, providing "Amplifier Saturation Check" routine for proper amplifier/antenna matching verification at 80% AM Modulation increased power.
 

Product description PDF format : English


 

 

Company contacts
 Click here to see Authorized Dealers Worldwide
Company in Italy
 Click here to see Dealers and Companies represented in Italy
Product Catalog
Download the Product Catalog Short-Form Catalog
Online RMA
Check your RMA Status RMA Status
Downloads
 Download page Software
Manuals
Join Mailing List
  email Address:
  Name:



Valid XHTML 1.0 Transitional CSS Valid!       Top of Page    Copyright © Narda Safety Test Solutions S.r.l. MCMXCVIII-MMXVI. All rights reserved. PIVA 00972040091 http://www.livio.net/